Builder Gel 3D HEMA and TPO free

Professional/home NO:HEMA & TPO builder gel – 3D Builder Gel opens up new possibilities for your creativity with an incredibly light and natural feeling on your nails. Innovative and highly functional material of the future of nail design for perfect and natural nail extension without the 20 most toxic substances.

TECHNICAL INFORMATIONS:
·       Durability: 28+ days
·       Viscosity: thick gel consistency
·       Gloss: medium
·       Pigmentation: clear
·       Self-leveling: low
·       Strength after drying: strong
·       Curing time in UV / LED lamp: 90sec
·       Application procedure: with a brush
·       Layers: 1 - 2
·       Thacky layer: yes
·       Color: clear
Appearence: clear viscous liquid
Scent: distinct acrylic
·       Non-standard factors: weak nail, brittleness, dryness, discoloration, hormonal imbalance…
·       Functional system: gel base + 3D builder gel + gel top
·       Ingredients: Acrylates copolymer, Ethyl methacrylate, Dimethicone      

USE: professional / consumer (home)
 
APPLICATION:
PREPARATION
1) Remove any old material. Take good care of the cuticle, clean the nail blank and clean the nails with a cleaner to remove grease and moisture from the nail. Soak a cellulose swab in the cleaning fluid and gently wipe the nail plate. Make sure that you clean the entire area, especially the nail walls and the cuticle area.
2) Then use a very fine nail file to gently roughen (obscure) the nail, again making sure you have gently roughened the area of the nail walls and cuticle.
3) Use a new cellulose swab soaked in a cleaner to remove dust after roughening the nail. Avoid touching the nail surface with your finger so that grease is not transferred, which will prevent the material from adhering.
BASE + 3D BUILDER GEL + TOP
1) Start with the left hand and apply one coat of Hard Base or Gummy Base on damaged nails and material flexibility requirements (for advanced nail designers: an excellent method is the "fan-in-base" technique into the nail plate, which you can learn in detail in our courses or videos of our nail technologists.)
2) Apply 4 fingers at a time and cure in a professional UV / LED lamp for 60 seconds. The surface after polymerization will have a flow layer that you do not touch.
3) Continue applying the thumb and then polymerize for 60 sec. Pay attention to the straight position of the thumb when curing.
4) Once you are done with all your fingers, you can proceed to the next step.
5) You start applying 3D Builder Gel to the untreated effluent. Cure for 90 sec. Cure for 90 sec. in UV / LED lamp. Do not wipe or touch the effusion again. Observe a time of at least 60 sec. Depending on the strength of the layer and longer. Due to the absence of HEMA, the curing time is longer.
6) After polymerization, apply color or Dry Top or Dry Matt finishing gel to the effluent after polymerization. Allow to cure for 60 sec.
7) After the finishing gel has hardened, you are done. Dry Top and Dry Matt have no effusion.
8) Follow the same steps with your right hand.
9) Finally, we drip a drop of caring oil and massage it into the cuticles with gentle movements not only in the area of the nail Matrix, but also in the area of the nail walls.

REMOVAL
Removal using a grinder:
We choose a suitable type of milling machine and carefully grind the material. We only use this method of removal if we have sufficient experience with the electric grinder. There is a risk of injury and sharpening of the natural nail. Advantage - speed. Disadvantage - there is a risk of destroying nails.

TIPS:
The perfect preparation before the gel varnish system is the care system Russian manicure, which "lifts" our skin for 30 minutes and we get visually "under" the color
The basis of success is also the art of really proper painting. We paint the nail with a thin-layer brush in three strokes with the final fixation of the free edge of the nail, the area at the cuticle can be precisely tightened with a micro brush - detailer.
If we buy a cleaner at home, then polishing our nails will guarantee a diamond shine that lasts for weeks.
Prior to the application of the gel varnish system, highly refractory, brittle, yellowed or sawn and damaged nails can be treated and nourished. For this purpose, we offer several products from our CARE collection.

SAFETY INFORMATIONS
This product is not suitable for children. Keep out of reach of children.
Avoid contact with skin. The product should not be applied outside the nail, on the surrounding skin. If this happens, wash with soap and water before curing. Seek medical attention if skin irritation occurs. Even if it does not contain HEMA, an allergic reaction to any other ingredient may occur.
Avoid contact with eyes. If this happens, rinse with a few minutes of water and see a doctor if the eye is irritated
Do not use this product if an allergic or other non-standard reaction occurs.
Always use disinfectant and rubber gloves when applying.
Recommended storage: keep tightly closed, at room temperature, without direct sunlight, pay attention to direct contact with UV or LED fluorescent lamps not only in the lamp, which can also slightly cure the material and then its functionality is reduced.
 
EXPIRATION DATE
3years, after opening 12months (according to recommended storage and use)